Top 10 typical forklift mishaps ， forklift procedure must focus on these issues ！.

Top 10 typical forklift mishaps ， forklift procedure must focus on these issues ！.

Blog Article

Do not ignore the forklift at the office. If the procedure is bad, there will certainly be severe mishaps in minutes, and there are many crashes involving forklifts.

Instance 1: The forklift cargo obstructed the chauffeur's view, and the person in front might not be discovered, causing a moving crash.
Case 2: In order to preserve the equilibrium of the forklift when lifting heavy goods, the employees used their body weight as the counterweight, which almost created casualties.
Case 3: The size of the forklift cargo exceeds the allowable width of the course and holds on the roadside shelf, which practically causes an accident.
Instance 4: Forklift is speeding up and surrender during a turn.
Case 5: The forklift driver did not see the pedestrian, and the pedestrian did not see the forklift.
Situation 6: The forklift lifts the personnel unlawfully, the forklift motorist does not wear the safety belt, the forklift lifter drops and the chauffeur is crushed when the forklift surrender.
Situation 7: The forklift driver did not put on a safety belt and fell from the car when it surrendered and was crushed.
Forklift operation need to take note of these matters ：.

Beginning.
1. Before beginning, observe the environments, and after validating that there are no challenges that prevent the security of driving, honk the horn initially and afterwards begin.
2. For automobiles with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure (air pressure) gauge must be secure before starting.
3. When the forklift starts with a tons, the driver must first validate that the load is stable and trustworthy.
4. The begin should be sluggish and constant.

Driving.
1. When driving, the height in between the bottom end of the fork and the ground should be kept at 300mm-400mm, and the mast should be slanted backwards. .
2. Do not lift the fork too expensive when driving. When entering and leaving the task site or while driving, beware that there will be no barriers overhead. When the lots is traveling, the fork must not be elevated too expensive, which will impact the security of the forklift. .
3. After unloading, the fork should be reduced to the typical driving setting before driving. .
4. When transforming, if there are pedestrians or automobiles close by, the driving signal must be provided first. High-speed sharp turns are prohibited. High-speed doglegs will create the vehicle to lose lateral stability and tip over. .
5. When the forklift is downhill, it is strictly restricted to turn off the fire and slide, and it is forbidden to brake suddenly while driving with lots unless there are special circumstances.
6. When the forklift is running, it has to follow the traffic rules in the factory and need to keep a certain security distance from the lorry ahead. .
7. When the forklift is running, the lots needs to be in the lowest placement that does not hinder the driving, and the gantry must be properly slanted back. The load shall not be raised other than when piling or loading. .
8. The elevation of the load should not obstruct the vehicle driver's sight. In unique conditions, when the thing affects the forward vision, drive at a low speed when reversing.
9. It is forbidden to turn on the ramp, neither to drive throughout the ramp. .
10. The risk-free driving speed of the forklift in the factory area is 5 km/h, and it has to drive securely at a low speed when entering the manufacturing workshop location. .
11. When the forklift is lifted, raised or driven, it is restricted for workers to base on the fork to hold items and play a stabilizing function. .
12. If issues are found, they will certainly be repaired and reported in a timely fashion, and they will certainly never run with health problems or conceal them.

loading and dumping.
1. When fork-loading products, the distance in between the two forks should be readjusted as needed to make the lots of both forks balanced and not manipulated, and one side of the item need to protest the rack. .
2. It is restricted to deal with a solitary fork or utilize a fork top or pull. In unique circumstances, safety and security warning signs have Stand-on Electric Pallet Stacker to be set up to advise surrounding pedestrians. .
3. In the process of filling and discharging things, the forklift needs to be stopped with the brake. .
4. The speed of the lorry ought to be slow-moving and stable. Take care not to roll the wheels on the dunnage, so as not to stretch the rolled things and hurt individuals. .
5. When using a fork to fork the goods, the fork must be as deep as feasible under the load, and it needs to be noted that the fork idea should not touch other items or objects. The tons needs to be stabilized with very little back tilt of the gantry to make sure that the tons does not glide in reverse. The mast can be tilted onward slightly when the tons is decreased to permit easy placement of the lots and removal of the forks. .
6. It is forbidden to fork products at broadband and ram hard items with the fork head. .
7. When the forklift is functioning, it is restricted for individuals to stand around the fork, so as to prevent the collapse of the goods and injure individuals. .
8. Overloading is restricted, and it is forbidden to make use of forks to raise personnel to engage in high-altitude operations to prevent high-altitude dropping crashes. .
9. It is not permitted to make use of the brake inertia to slip, put, round or roll objects. .
10. It is not allowed to use forks to choose, turn pallet discharge.

Leaving .
1. It is restricted to leave the forklift when the products on the fork are in the air. Prior to leaving the forklift, you need to discharge the goods or reduced the fork framework.
2. Draw the hand brake take care of to dead or dispirit the hand brake button.
3. The engine is switched off and the power is removed. (Except for unique scenarios, such as the motorist does not leave the automobile's view and does not go beyond 1 min).
4. Eliminate the secret. .

Forklift Operation Precautions.
1. Before and after the forklift operation, the look needs to be examined, and gas, lubricating oil and cooling water ought to be added.
2. Examine the safety and security efficiency of beginning, running and braking.
3. Check whether the lights and horn signals are full and reliable.
4. Throughout the operation of the forklift, check whether the stress and temperature level are typical.
5. After the forklift is running, the external leak needs to additionally be inspected and the seals ought to be changed in time.

Forklift Safety Operation Specifications.
1. You have to inspect before leaving the car;.
2. When you run into a person in front of you during driving, you need to send a signal at a distance of 5 m;.
3. The driving speed in the manufacturing facility does not surpass 5 km/h;.
4. When driving, the low point of the freight ought to be 0.3 m ~ 0.4 m above the ground;.
5. The transforming ought to not be too sharp to stop the tendency of "free switching";.
6. Running up and down the incline ought to be slow-moving and uniform, and no activating the incline is allowed.
7. Electric Forklift Truck for Warehouse Do not drive throughout the gradient. When the slope is higher than 10%, the automobile must be driven in reverse when going downhill;.
8. When the forklift personnel bring the goods and move forward, if they encounter big or heavy products and go to the motorist's line of sight, they need to take the reversing workout
.
The "Eight Prohibitions" ought to be adhered to in the operation.
1. Solitary fork procedure is not allowed.
2. It is not permitted to lift the goods for long distance driving.
3. It is not permitted to get the goods by passing on the pallet with the fork.
4. It is not enabled to straight shovel chemicals, flammables and other harmful chemicals with forks.
5. It is not permitted to use inertia pressure to grab the goods.
6. It is not allowed to utilize stopping force to expatriation round or easy-to-roll items.
7. It is not permitted to bring people to service the pallet or fork, and it is purely forbidden to stand under the fork after the fork is raised.
8. Do not drive side to side on inclines
.
Vehicle parking is not allowed under the list below problems.
1. Curves, narrow roads, railway crossings;.
2. Areas with a longitudinal incline greater than 5%.
3. When there is an obstacle on one side of the road, the opposite side of the area with the exact same size as the barrier should be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844